AIAIAI unveils portable wireless studio monitors with low-latency tech

AIAIAI, which is best known for its headphones, is moving into new territory with a set of wireless speakers. The Unit-4 Wireless+ studio monitors use the same low-latency tech as the Danish brand's headphones. AIAIAI suggests that they will enable folks "to create and mix music with accurate sound representation and powerful performance" wherever they might happen to be.

That suggests the speakers will be useful for those who like to make music while they're on the road, but would rather have studio monitors than headphones despite the extra bulk. (Even though they weigh a relatively paltry 2.5kg, the speakers will be more cumbersome than carrying around a set of cans.). The speakers may also be useful for garden DJ sets or any other environment in which latency is key and wired options are impractical. They will run you $800 for a pair.

These monitors employ W+ Link wireless technology, which requires the use of an X02 transmitter (you can also use Bluetooth 5.2 or a cable to connect them to an audio source). AIAIAI says they have 16ms of latency via W+ Link and deliver uncompressed audio. The system employs dual antennas and higher bandwidth than Bluetooth can handle in an effort to maintain a robust connection. The batteries will run for up to 20 hours on a single charge, the brand claims, and it will take two hours to fully recharge them.

AIAIAI Unit-4 Wireless+ studio monitors on wither side of a laptop someone is using.
AIAIAI

AIAIAI says these speakers offer reference monitor sound. You'll be snapping up a two-way active monitor that features a four-inch high-excursion woofer and one-inch silk-dome tweeter. Thanks to a bass vent (which can also be used as a carrying handle) and tuned boosting EQ, the monitors will deliver "a clean bass extension down to 40Hz," AIAIAI claims. Since they employ a stage monitor design, you can angle the speakers horizontally to optimize the audio for your surroundings.

Using the AIAIAI Unit-4 app, you'll be able to further align the sound field with the environment you're working in. There's a customizable five-band EQ and five presets. You can use the app to adjust the brightness of the LED ring too.

Meanwhile, AIAIAI has designed the Unit-4 speakers with sustainability in mind. The main plastic components are made with 100 percent post-consumer recycled plastic. The monitors have a glue-free design, so it should be easy to replace components such as the battery or speaker drivers when necessary. You'll be able to upgrade parts as well. On top of that, the Unit-4 is designed to be completely recyclable.

This article originally appeared on Engadget at https://www.engadget.com/aiaiai-unveils-portable-wireless-studio-monitors-with-low-latency-tech-150102242.html?src=rss

Source

AIAIAI, which is best known for its headphones, is moving into new territory with a set of wireless speakers. The Unit-4 Wireless+ studio monitors use the same low-latency tech as the Danish brand's headphones. AIAIAI suggests that they will enable folks "to create and mix music with accurate sound representation…

Leave a Reply

Your email address will not be published. Required fields are marked *