Two HPE Juniper routers were reportedly behind the FAA nationwide ground stop, which grounded all US flights
Share this article
Join the conversation
- Two newly installed routers reportedly overwhelmed the FAA’s aging communications network
- FAA controllers lost communications, forcing an unprecedented nationwide flight suspension
- TCAS remained unaffected despite failures in controller-pilot communications
Recently installed HPE Juniper routers reportedly triggered the recent US nationwide aviation disruption after overwhelming the Federal Aviation Administration’s (FAA) aging communications infrastructure.
The incident forced the FAA to suspend flights across the United States while technicians investigated interruptions affecting communications between air traffic controllers and pilots.
Although the equipment itself reportedly remained operational, excessive network traffic exposed vulnerabilities within infrastructure that the agency has been gradually replacing.
Latest Videos FromTechRadar
New routers reportedly overwhelmed the FAA communications infrastructure
The disruption reportedly originated at two locations where HPE Juniper routers started transmitting unusually large volumes of data.
Investigators traced the affected equipment to an FAA radio facility in El Dorado, Arkansas, and a radar installation in Amarillo, Texas.
The problem initially emerged at the Indianapolis Center, which is responsible for managing aircraft movements across northern Kentucky, southern Indiana, southern Ohio, and parts of West Virginia.
Personnel experienced difficulties communicating with flight crews, prompting investigators to examine the agency’s nationwide communications network.
Sign up to the TechRadar Pro newsletter to get all the top news, opinion, features and guidance your business needs to succeed!
“We saw two places that were actually pinging our network at a very high rate, a thousand connections over every four to five seconds,” said Rebecca Guy, FAA technology chief.
Although such traffic volumes would ordinarily present limited difficulties for modern networking infrastructure, the FAA operates an aging communications system.
Consequently, the equipment struggled to accommodate the incoming traffic, resulting in communication interruptions that prevented controllers from coordinating aircraft movements.
The disruption reportedly did not affect aircraft collision-avoidance equipment, including the Traffic Collision Avoidance System (TCAS), which uses onboard transponders.
Nevertheless, communication difficulties between controllers and pilots left the agency unable to coordinate air traffic safely, necessitating an emergency nationwide ground stop.
FAA investigates router configuration as HPE defends its equipment
A nationwide ground stop remains an exceptional measure, with the FAA having invoked it only twice before the latest incident.
Those previous occasions involved the September 11, 2001, terrorist attacks and a January 11, 2023, outage affecting its Notice to Air Missions system.
The agency needed approximately four hours to restore its communications network after identifying the problematic equipment.
Technicians subsequently disabled a particular router feature across the network’s installed Juniper devices, preventing further disruption.
HPE, the manufacturer of the affected networking equipment, maintained that its routers were operating according to their intended specifications.
The company disputed suggestions that hardware failure directly caused the communications breakdown.
FAA Administrator Bryan Bedford nevertheless indicated that investigators were examining several possible explanations for the incident.
These included installation problems, configuration errors, and potential shortcomings associated with the router technology itself.
“Was it a faulty installation? Was it a faulty configuration? Or was it just a bad piece of router technology that we put into this system that propagated these errors?” said Bedford.
The FAA is already transitioning from decades-old copper connections to fiber-optic technology, an extensive modernization program costing taxpayers billions of dollars.
Via Tom’s Hardware

Follow TechRadar on Google News and add us as a preferred source to get our expert news, reviews, and opinion in your feeds.
Share this article Join the conversation Follow us Add us as a preferred source on Google Newsletter Subscribe to our newsletter Two newly installed routers reportedly overwhelmed the FAA’s aging communications network FAA controllers lost communications, forcing an unprecedented nationwide flight suspension TCAS remained unaffected despite failures in controller-pilot communications…
Recent Posts
- The leaked Lenovo Legion Go Beam could be the affordable handheld we need
- Two HPE Juniper routers were reportedly behind the FAA nationwide ground stop, which grounded all US flights
- Google is forcing Android app developers to properly support foldables
- Hey, you stuffing cash into your mattress — this series of unfortunate tech outages is not connected, nor is it the end of our digital world
- GTA 6 launch day: Live updates on the biggest game of the year
Archives
- November 2026
- October 2026
- September 2026
- August 2026
- July 2026
- June 2026
- May 2026
- April 2026
- March 2026
- February 2026
- January 2026
- December 2025
- November 2025
- October 2025
- September 2025
- August 2025
- July 2025
- June 2025
- May 2025
- April 2025
- March 2025
- February 2025
- January 2025
- December 2024
- November 2024
- October 2024
- September 2024
- August 2024
- July 2024
- June 2024
- May 2024
- April 2024
- March 2024
- February 2024
- January 2024
- December 2023
- November 2023